The wireless solution for setting up, monitoring and updating the SmartSolar charge controller.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially under overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced maximum power point detection in partial shading.
In case of partial shading, two or more maximum power points (MPP) may exist on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, but this may not be the optimal MPP.
The innovative algorithm of the SmartSolar device will always maximize the energy yield by adjusting to the optimal MPP.
Excellent efficiency
No cooling fan. Maximum efficiency over 98%.
Flexible charging algorithms
Fully programmable charging algorithm (see also the software page on our website) plus eight pre-programmed algorithms selectable via a rotary knob (see our manual for more details).
Comprehensive electronic protection
Overheating protection and load derating at high temperatures. Protection against PV short circuit and PV reverse polarity. PV reverse current protection.
Internal temperature sensor
Balances constant and float voltages according to temperature.
Optional external battery voltage, temperature and current measurement via Bluetooth
Using a Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt, battery voltage and temperature (and current, in the case of a BMV-712 or a SmartShunt) can be transmitted to one or more SmartSolar charge controllers.
Synchronized parallel charging with Bluetooth
Up to 10 devices can be synchronized via Bluetooth.
Recovery function for fully discharged batteries
Will initiate charging even if the battery has been discharged to zero volts. Reconnects to a fully discharged lithium-ion battery with internal disconnect function.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, a PC or other devices.
Remote controlled on/off switching
For example, for connection to a VE.BUS BMS
Programmable relay
Can be programmed (e.g. with a smartphone) to trigger an alarm or other events.
Optional: plug-in LCD display
Simply remove the rubber seal that protects the connector on the front of the controller and plug in the display.
