High performance level With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. Additionally, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard.
Adaptive 6-stage loading algorithm: Test- Bulk - Absorption - Recondition - Float - Storgage The Blue Power charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use.
Storage mode: Less maintenance and aging in idle state of the battery: Storage mode is activated whenever no discharge has occurred within 24 hours. The float charge voltage is then lowered to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and prevent corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a sort of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure.
Also charges lithium-ion (LiFePO₄) batteries LiFePO₄ batteries are charged using a simple constant current phase – constant voltage phase – float voltage phase algorithm.
The settings NIGHT and LOW If the device is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the nominal output and the charger operates completely silently. NIGHT mode ends automatically after 8 hours. LOW mode can be ended manually.
Protection against overheating The output current will be reduced when the temperature rises up to 50°C, but the Blue Power charger will not fail.
Eleven LEDs for status display Charging algorithm: TEST / BULK (CONSTANT CURRENT PHASE) / ABSORPTION (CONSTANT VOLTAGE PHASE) / RECONDITION (REGENERATION) / FLOAT (FLOAT CHARGE PHASE) / STORAGE (STORAGE MODE) / READY MODE button settings: NORMAL (14.4 V) / HIGH (14.7 V) / RECONDITION (REGENERATION) / LI-ION
